spec no: dsaf1342 rev no: v.1 date: mar/30/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300384 2 package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. 2.0x1.25mm smd chip led lamp features 2.0x1.25mm smt led,0.5mm max.thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant. aphcm2012seck - f01 super bright orange description the super bright orange source color devices are made with dh ingaalp on gaas substrate light emitting diode .
spec no: dsaf1342 rev no: v.1 date: mar/30/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300384 2 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 aphcm2012seck - f01 super bright orange (ingaalp) water clear 50 160 110 symbol parameter device typ. max. test conditions units peak peak wavelength super bright orange 610 nm i f =20ma d dominant wavelength super bright orange 601 nm i f =20ma ? 1/2 spectral line half - width super bright orange 29 nm i f =20ma c capacitance super bright orange 15 pf v f =0v;f=1mhz v f forward voltage super bright orange 2.1 2.5 v i f =20ma i r reverse current super bright orange 10 ua v r = 5v parameter super bright orange units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 195 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf1342 rev no: v.1 date: mar/30/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300384 2 super bright orange aphcm2012seck - f01
spec no: dsaf1342 rev no: v.1 date: mar/30/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 120300384 2 tape specifications (units : mm ) recommended soldering pattern (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. aphcm2012seck - f01
|
